新闻中心
News Center
新闻中心
Nine advantages of three-in-one feeder
Date:2023-05-30
Category:Industry information
Author:Qinchao Intelligent Equipment Co., Ltd.

Continuously improving the quality and practicality of the feeder is the demand and direction of customers. In recent years, the three-in-one feeder has won wide praise from customers for its excellent performance, efficient and stable capacity. With the accumulation of experience and extensive listening to customer feedback, as well as the exploration and research and development of new technologies and new materials, after 13 years of accumulation and development, the three-in-one feeder can be more excellent and efficient, fully demonstrate the "beauty of intelligent manufacturing", and help customers "win" in the future.


Nine performance characteristics of the three-in-one feeder:


1. On the main shaft of the material rack, the pneumatic feeding arm and the material rack limiting rod limit the coil material from the inside and outside directions respectively, so that it is more stable when rotating.


2. The material rack pressing arm is changed from traditional hydraulic pressing to pneumatic pressing, which is safe and reliable, environmentally friendly and energy-saving, reduces noise, and reduces the volume of the hydraulic station and reduces the use cost. A horizontal motor is installed on the thick plate pressing arm to drive the pressing wheel to rotate and tighten the material to ensure that the material will not rebound and maximize the safety of production.


3. Install a blocking material detection device to automatically detect the rotation angle of the spindle of the material rack and the thickness just now to ensure that the speed of the spindle of the material rack is accurately controlled.


4. The uncoiling control of the coil material is changed from a traditional group of optoelectronics to two groups of optoelectronics. The material only needs to block one group of optoelectronics to ensure that the material rack stops rotating and avoid damage to the equipment caused by the failure of optoelectronics.


5. A pneumatic feeding pressure plate device is added to the feeding port of the leveling feeder head, and the material head can be automatically sent into the leveling machine by pressing it down, which is stable and reliable.


6. Add a perspective window to ensure the safety of operators.


7. The processing technology of leveling and feeding rollers is greatly optimized and improved to improve its dimensional accuracy and wear resistance.


8. Use the optimized electronic control system: Japan's Mitsubishi PLC, Germany's Eston servo motor, high-precision worm gear reducer, metal bellows coupling, no transmission clearance, no corner error, to ensure feeding accuracy and stability.


9. The material rack, leveling and feeding complete-built unit is controlled by the touch screen integration, with real-time monitoring and running state detection functions, safe and stable operation, and easier and more worry-free operation.