The punch feeder has high precision, is environmentally friendly, saves time, and greatly reduces labor intensity, which truly achieves low cost and high return. The following editor wants to introduce to you the machine types of punch feeder and the characteristics of the standard type. Welcome to read!

Machine type of punch feeder:

　　A type B type pneumatic feeder.

　　Pneumatic feeder, also known as air automatic feeder, is divided into many types, including special floor-to-ceiling pneumatic feeder, left and right position pneumatic feeder, rodless pneumatic feeder, etc. Now it mainly introduces the special floor-to-ceiling type, the main features are as follows:

　　1. Pneumatic feeder is suitable for automatic processing of various large-size materials.

　　2. Using electromagnetic cutting (electronic control variable) and micro switch control, the feeding time can be advanced or delayed. The movable tripod can match the height of the punch and shearing machine, and the material can be changed arbitrarily.

　　3. Simple installation, safe and easy operation, small failure rate and accurate feeding accuracy.

　　NC roller feeder.

　　Features: Through CCS (Computer Control Servo System), various numerical controls that were impossible in the past are realized with high precision. The operation is simple, fast and accurate.

Standard Features of Punch Feeder

　　1. Electroplating after grinding the large hole in the main center can better ensure the cylindricity and straightness of the large hole in the center, and make the movement of the large rod in the center smoother.

　　2. The main body is treated with anti-rust treatment after processing, and ultrasonic cleaning is carried out before assembly to ensure that the machine will not fail due to processing residues.

　　3. The replaceable reversing valve adopts a large rounded structure, and the inner hole is mirror polished, which greatly improves the feeding speed of the automatic feeder/punch feeder/Dongguan feeder and the service life of the sealing ring.

　　4. The new floating rod adopts a two-position three-way valve structure, which completely solves the problem that the floating rod position is prone to air leakage.

　　5. Two sets of air pressure buffers are used to automatically absorb the inertial shock of the air feeder during use, effectively reducing vibration and noise.

　　6. The guide rail is made of high-strength steel plated with hard chrome after heat treatment, and the movable body and the guide rail are finely ground to make the movement of the moving body more flexible and stable.

　　7. All screws are installed with high-strength compressed oxygen glue, so it will not be loose due to the vibration of the automatic feeder/punch feeder/Dongguan feeder during long-term use, and a good sealing effect can be achieved.

　　8. The overall structure is compact, high precision, fast speed, beautiful and practical; all machines have been strictly tested before leaving the factory, and quality problems occur within one year (except for human factors and normal wear of the sealing ring), which can be guaranteed for free.